Reset Pioneer S-Line BIOS to Defaults

Reset Pioneer S-Line BIOS to Defaults


Objectives

  1. Reset BIOS to factory default settings.

Prerequisites


  1. A Pioneer S-Line or M5 terminal.
  2. A USB keyboard.

Instructions

  1. If the terminal is powered on, shut it down and power it off.
  2. Connect a USB keyboard to the port on the left-hand side of the monitor.
  3. Press and release the power switch underneath the left-hand side of the monitor.
  4. Begin pressing the Delete key about once-per-second until you see the screen that says BIOS SETUP UTILITY at the top.

Note: Be sure that you are pressing the Delete key; the Backspace key will not work.

  1. Press the F9 key. A dialog box that says Load Optimal Defaults? will appear.
  2. Use the arrow keys to highlight the Ok button and press Enter.
  3. Press the F10 key. A dialog box that says Save configuration changes and exit setup? will appear.
  4. Use the arrow keys to highlight the Ok button and press Enter.
  5. The terminal will reboot. It should boot up normally and load the application login screen.

 


    • Related Articles

    • Boot Pioneer S-Line from a USB Device

      Boot Pioneer S-Line from a USB Device Objectives Boot an S-Line terminal from a USB device such as a thumb drive or an external DVD drive. Prerequisites USB keyboard. Pioneer S-Line terminal. Small Phillips screw driver. Bootable USB device such as a ...

    • BIOS Settings for Pioneer Cyprus Terminals

      BIOS Settings for Pioneer Cyprus Terminals There are several BIOS settings that are required in order for a Pioneer Cyprus terminal to work correctly. Specifically: UEFI Boot must be set to Enabled. Boot Option #1 must be set to UEFI OS (P0: SATA ...

    • How to Check the HDD Cable Connections on Pioneer S-Line Terminals

      How to Check the HDD Cable Connections on Pioneer S-Line Terminals Objectives Check and reseat connections for cables attaching the HDD to the terminal. Prerequisites These instructions apply only to Pioneer S-Line Terminals and will not apply to ...

    • Update BIOS on DT Research DT315BT Tablets

      Objectives Update the BIOS on DT315BT tabets so OS Images 7.1.0+ install correctly. Prerequisites DT315BT Tablet DT Research dock BIOS update USB drive Keyboard Instructions Insert "BIOS Update" USB drive into the USB port on the left-hand side of ...

    • Boot Pioneer Cyprus Terminals from USB

      Boot Pioneer Cyprus Terminals from USB Objectives Boot a Cyprus terminal from a USB device such as a thumb drive in order to install a new operating system. Prerequisites 1. USB keyboard. 2. Cyprus terminal. 3. Bootable USB device such as a thumb ...