Boot Pioneer Cyprus Terminals from USB

Boot Pioneer Cyprus Terminals from USB

Boot Pioneer Cyprus Terminals from USB

Objectives

Boot a Cyprus terminal from a USB device such as a thumb drive in order to install a new operating system.

Prerequisites

1. USB keyboard.
2. Cyprus terminal.
3. Bootable USB device such as a thumb drive with an OS image installer.

Instructions

***Before you begin, please take a picture or take note of current network settings of this device. Static IPs could be necessary for receipt printing or a bar terminal.***

1. Shutdown the terminal.
2. Plug in the USB drive and the keyboard.
3. Power on the terminal, and press "F11" once every second until a boot device prompt appears.
4. On the list of available boot devices, choose the USB installer in UEFI mode and press enter. This will appear as "UEFI: [Name of USB device]".


5. A menu with the FullCount logo will appear with 2 options. Choose the option that begins with "Install FullCount..."


6. The installer will run and install the operating system. When it reboots, unplug the USB drive. The drive should now boot with the new operating system.

You can find a customer-oriented PDF of these instructions titled "How to Re-Image a FullCount Terminal" here: J:\FullCount\Documentation\Support\Help Article PDFs\Current Versions


    • Related Articles

    • BIOS Settings for Pioneer Cyprus Terminals

      BIOS Settings for Pioneer Cyprus Terminals There are several BIOS settings that are required in order for a Pioneer Cyprus terminal to work correctly. Specifically: UEFI Boot must be set to Enabled. Boot Option #1 must be set to UEFI OS (P0: SATA ...

    • Boot Pioneer S-Line from a USB Device

      Boot Pioneer S-Line from a USB Device Objectives Boot an S-Line terminal from a USB device such as a thumb drive or an external DVD drive. Prerequisites USB keyboard. Pioneer S-Line terminal. Small Phillips screw driver. Bootable USB device such as a ...

    • Boot DT315CT from a USB Drive

      Boot DT315CT from a USB Drive Objectives Boot a DT Research DT315CT from a USB drive. Prerequisites DT Research DT315CT tablet. Docking station with AC adapter. USB keyboard. Instructions Plug the AC adapter into port on the back of the docking ...

    • Booting from USB and Installing OS Images on Legacy Hardware

      Booting from USB and Installing OS Images on Legacy Hardware Introduction This article provides links to instructions on how to boot from USB and install OS images on old hardware that is no longer actively sold by FullCount. This page will be ...

    • Boot Partner Tech ALFA from USB

      Boot Partner Tech ALFA from USB Prerequisites 1. USB keyboard. 2. Partner Tech ALFA. 3. Bootable USB device such as a thumb drive with an OS image 7.X.X installer. Instructions 1. Shutdown the terminal. 2. Plug in the USB drive and the keyboard. 3. ...