How to Copy USB Drives on the StarTech Disk Duplicator

How to Copy USB Drives on the StarTech Disk Duplicator

Objectives

Copy/clone USB drives for mailing OS images or for testing.

Prerequisites

  1. StarTech USB duplicator.
  2. Source image USB drive.
  3. 1-5 blank USB drives.

Instructions

Step-by-step instructions for accomplishing your objectives.

  1. Plug USB drive labelled “Source (model)” into Source 1 port on the duplicator.
  1. Plug up to 5 blank drives into any of the T2-T6 slots.
  1. Turn the duplicator on with the power switch on the back.
  1. The duplicator display will show “1.Copy(Data).”
  1. Press the circular button, the duplicator will read drives.
  1. When the duplicator says “X to start” where X is the number of drives plugged in to copy, press the circular button again.
  1. The duplicator will begin copying. It usually takes around 5 minutes.
  1. When the disks are 100% copied and done, the duplicator will beep and can be turned off. Ensure there is a green light under each drive that was duplicated. A red light indicates an error.

    • Related Articles

    • Boot DT315CT from a USB Drive

      Boot DT315CT from a USB Drive Objectives Boot a DT Research DT315CT from a USB drive. Prerequisites DT Research DT315CT tablet. Docking station with AC adapter. USB keyboard. Instructions Plug the AC adapter into port on the back of the docking ...

    • Copy Certificates to Filesystems for Enterprise Networks on OS Image 7.3.1+

      Copy Certificates to Filesystems for Enterprise Networks on OS Image 7.3.1+ Objectives Copy security certificates to a FullCount filesystem so Network Manager can load them and gain network access. Prerequisites Keyboard (possibly mouse if KDS/Print ...

    • How to Create a USPS shipping label for USB Drives

      Objectives Create lable for your shipment Update a customer's hardware OS image Prerequisites Login information for https://www.usps.com/ Credit card information used at Checkout Instructions Go to https://www.usps.com/ and login with the appropriate ...

    • Restore a Jungle Disk backup on your PC

      Restore a Jungle Disk backup on your PC Launch Jungle Disk Workgroup on your PC. Follow along with the setup wizard to get logged in. For the domain, use fullcount Enter the username/password Configure your backups to the disk with your username tied ...

    • Copy-down Process for Remote Servers

      Copy-down Process for Remote Servers Note: This is just the "copy-down" process; it does not include steps for installing or configuring the OS, database, or applications. Create a new directory on "fcadmin01.fullcount.net" with the community code ...