How to change the RP-600 USB to WinDriver mode Using FEED button

How to change the RP-600 USB to WinDriver mode Using FEED button

Objectives

Change the RP-600 printer from API Mode to WinDriver Mode.

Prerequisites

1. Partner Tech printer plugged in to AC power.

Instructions

  1. Do the printer self-test page first by holding down the FEED button while powering on the printer. You will find the default setting is “API mode” under "Interface Mode."
    • **Note: If the paper is not printing text, make sure the paper is facing the right direction, seated correctly, and is the correct type of paper.
  2. Press and hold the FEED button to enter the printer setting menu. Press the FEED button 3 times and then press and hold FEED button to enter “Configuration.”
  3. Press the FEED button 3 times and then press and hold FEED button to enter “Communication.”
  4. Press the FEED button 2 times and press and hold FEED button to enter “Usb  Interface.”
  5. Press the FEED button 2 times and press and hold FEED button to select  “WinDriver mode.”
  6. Press the FEED button 1 time and then press and hold FEED button to select  “Back to Last Menu.”
  7. Press the FEED button 2 times and then press and hold FEED button to select  “Exit With Save.”
  8. Power off the printer then do the printer self-test page again. You should find the USB Interface mode has change to “WinDriver Mode” already.  If not, please re-do steps 2~7 again

 


    • Related Articles

    • Self-Service Mode

      Self-Service Mode How Self-Service Mode Works Self-service mode is a stripped-down version of the application. When the application starts, it prompts the user to sign-in. This can be done by signing in with a number or swiping a card. A message on ...

    • Process Mode

      Process Mode Process mode allows communities to set up a processing order to take multiple orders at one time in sequence. Then each group of orders can be processed at once by being sent to the kitchen and closed. This is typically used in a ...

    • Mode Settings

      Mode Settings General Description – This is the description for the mode. Screen Description – This is the description for the mode that will appear on the touchscreen. Mode Type – This field determines whether a mode is applicable for the ...

    • Emulation Mode Setup

      Emulation Mode Setup The "Emulation Mode" setup is very simple. Communities use emulation mode as a way of using non-FullCount devices such as desktop computers to ring in real transactions without sacrificing some of FullCount other features such as ...

    • Boot Partner Tech ALFA from USB

      Boot Partner Tech ALFA from USB Prerequisites 1. USB keyboard. 2. Partner Tech ALFA. 3. Bootable USB device such as a thumb drive with an OS image 7.X.X installer. Instructions 1. Shutdown the terminal. 2. Plug in the USB drive and the keyboard. 3. ...