Epson Wi-Fi Dongle (OT-WL06)

Epson Wi-Fi Dongle (OT-WL06)

Objectives

What are you trying to accomplish?

Enable Wi-Fi functionality on Epson Receipt Printer

Prerequisites

What do you need in order to accomplish your objectives?

  1. Epson Receipt Printer (TM-T88VII)
  2. Epson OT-WL06 Wi-Fi dongle

Instructions

Step-by-step instructions for accomplishing your objectives.

Keep in mind that with our contracts currently (as of Jan 2025), wireless printers are not currently supported through regular support channels.

 

Instructions for getting the Wi-Fi dongle functional.

  1. Factory reset the printer. Turn the printer OFF, and then hold down the status sheet button at the back with a pen, while powering the device on. This will factory reset the device, and a print out will confirm this status.
  1. Download the TM-Utility App on any mobile device.
  1. Within the application, at the top, select the appropriate printer model, and please use the NFC reader to find the device. Simple tap the back of your mobile phone against the printer, where the NFC logo is on the top left side, and you should then be prompted to directly connect to the device. Alternatively, you can scan the QR code that prints out.
  1. Once prompted, enter the password for the direct SSID - this will be the Serial Number of the device.
  1. You will then be prompted to designate a Wi-Fi network. You will need to select the network from the list of available networks, and then designate Manual for IP assignment.
  1. Assign an available static wireless IP address, along with the appropriate subnet mask, and default gateway.
  1. Confirm these changes.
  1. After selecting Finish, please allow a few moments for the network changes to apply to the device.
  1. Once the Wi-Fi symbol on the device stops blinking, it is ready for use.
  1. Ensure that the IP address is designated as the default receipt printer for your tablet - you will need to call FullCount support to have this designated. If you experience any networking issues, you will need to speak to your IT team to troubleshoot further.

 


    • Related Articles

    • Update Epson E04 Network Adapter Firmware

      Update Epson E04 Network Adapter Firmware Objectives Update firmware for the Epson E04 network adapter. Prerequisites E04 printer plugged into a network. PC that can access the Epson WebConfig utility. UBEFlash program (FW 1.28 link) Instructions 1. ...

    • Epson TM P80II Wireless Portable Printer Set Up

      Epson TM P80II Wireless Portable Printer Set Up Prerequisites: Community wireless/network information needed for the printer. Device with QR code scanning capabilities Epson TM Utility App (Optional, but suggested) YouTube Video Tutorial: ...

    • Epson Spare In The Air Process

      Epson Spare In The Air Process All Epson U220B printers sold through FullCount come with a 2 year Spare in The Air warranty. This is simply an advanced replacement warranty for the customer where if there is a defective printer, Epson will ship a ...

    • Cleaning Thermal Head on Epson Receipt Printer

      Cleaning Thermal Head on Epson Receipt Printer This article refers to the Epson TM88V thermal receipt printers. This will be the same for both the stand-alone network receipt printer, and the built in all in one printer. A dirty Thermal Head on a ...

    • Known bugs in Epson E0X Network Adaptor firmware

      Known bugs in Epson E0X Network Adaptor firmware Firmware Version Affected Observed Symptom Associated Redmine Task Fix? 1.04 - 1.06 The default gateway is reset to 0.0.0.0 unexpectedly. #7369 Update the firmware to the latest version. ...