Set Static IP on Axia Terminals

Set Static IP on Axia Terminals

Set Static IP on Axia Terminals

To display the network information of a Axia Terminal key in the following sequence. “Yellow – 4 – 7”

Select F2 to modify or F3 to test.

Modifying  (After selecting F2)

  1. Press 0 for DHCP or 1 for Static (Can also arrow to these selections)
    1. In Static
      1. Arrow to select the correct line to edit.
      2. Yellow button to backspace one character at a time to clear out line
      3. Enter in new information with number pad
        1. **NOTE** octets with 1 or 2 digits need to be entered with a leading zeros. For example: 123.456.78.9 needs to be entered as 123.456.078.009 on the device.
      4. Arrow to bottom of screen until F1 to Save or F4 to Cancel is shown press button desired.

 


    • Related Articles

    • Axia Integration Set-Up

      Objectives Set-up Axia credit card integration Prerequisites Access to FullCount back office application Organization Id, API Token, and API ID for community's Axia instance Serial numbers of Axia terminals Instructions Under the Communities page, ...

    • FullCount Office Network Information / Static IP Addresses

      Network Info: Description Value(s) Subnet 10.5.1.0/24 DHCP Scope 10.5.1.20 - 10.5.1.170 Default Gateway 10.5.1.254 DNS Servers - External 8.8.8.8 8.8.4.4 DNS Servers - Internal 10.118.198.11 10.118.198.12 Documented Static IPs: Note: To start with, ...

    • Set Static IP Address on Wired Devices for OS Image 7.2.X

      Set Static IP Address on Wired Devices for OS Image 7.2.X Objectives Set a static IP on a device that has a wired (Ethernet) interface. Prerequisites Wired device Keyboard Monitor/display Instructions Plug in keyboard and if necessary, display into ...

    • Set Static IP Address on Wired Devices for OS Image 7.1.X and Earlier

      Objectives Set a static IP on a device that only has a wired (Ethernet) interface. Prerequisites Wired device Keyboard Monitor/display Instructions Plug in keyboard and if necessary, display into the device. Press "Ctrl+Alt+F1" which will show a ...

    • Set Static IP and Network Settings on DLI Tablets with OS Image 6.0.0

      Set Static IP and Network Settings on DLI Tablets with OS Image 6.0.0 Objectives Set wireless and wired network settings on DLI tablets. Prerequisites DLI Tablet USB Keyboard Network information Static IP for Wireless connection Static IP for Wired ...