Imaging a EVO-PC4-D2UN

Imaging a EVO-PC4-D2UN

Prerequisites:

  • POS-X EVO-PC4-D2UN (GZ serial number, NOT KQ or R)
  • USB Keyboard
  • KDS image USB drive
  • Monitor w/ VGA cable
  • Network Connection

 

Directions:

1. Register the S/N to the database and set up in the Back office accordingly. If this is not done, it will not grab the config file correctly.

2. Unpack the CPU, connect power and connect to the network.

3. Insert the KDS image USB drive and USB keyboard into the USB ports on the back of the CPU. Connect the VGA cable to the monitor and the CPU.

4. Power on the CPU and begin to press the F7 key about 1 time per second. This will bring up the boot options page.

5. Select the USB drive with KDS Image on it, by using the arrow keys on the keyboard, and press enter. This will start the installer.

6. At the end of the installer process, the CPU will reboot itself. Once the CPU is off, remove the USB drive. If not, the POS-X machine will default to boot from the last device booted.

7. Once the finishes booting, press Ctrl+Alt+F1 to access the shell, and login.

8. First, set the correct time zone for the community where this KDS CPU will be. Follow the directions below:

  • Type #yast timezone and press Enter.
  • Select the appropriate time zone from the list.
  • Tab to OK, and press Enter.

9. Next, you must configure the Serial Number file.

  • Use vi to edit the serial number file.
    • #vi /etc/sysconfig/fullcount_serial_number
  • Press i to be able to edit the file.
  • Type in the correct serial number from the Serial Number on the Tag of computer.
  • Press the Esc key to quit insert mode.
  • Exit and save your work.
    • #:wq

10. Finally, the product model file is incorrect and needs to be updated.

  • Use vi to edit the product model file:
    • #vi /etc/sysconfig/fullcount_product_model
  • Press i to be able to edit the file.
  • Clear out the contents of the file using the backspace key. The file incorrectly reads "CedarTrail Platform" and needs to be changed to "EVO-PC4-D2UN" Do not enter the Quotation Marks
  • Press the Esc key to quit insert mode.
  • Exit and save your work.
    • #:wq

 


    • Related Articles

    • Adding Carriage Return to Honeywell Voyager 1470G Area Imaging Scanner

      Adding Carriage Return to Honeywell Voyager 1470G Area Imaging Scanner Objectives Add Carriage Return to Honeywell Voyager 1470G Area Imaging Scanner Prerequisites Honeywell Voyager 1470G Area Imaging Scanner Instructions Scan the attached barcode to ...

    • Restore a Jungle Disk backup on your PC

      Restore a Jungle Disk backup on your PC Launch Jungle Disk Workgroup on your PC. Follow along with the setup wizard to get logged in. For the domain, use fullcount Enter the username/password Configure your backups to the disk with your username tied ...

    • FullCount Hardware Information - Vendor Part Numbers

      FullCount Hardware Information - Vendor Part Numbers Lang Technologies, Inc. DBA FullCount ScanSource Account number is 1000020733. ID Common Name Vendor Manufacturer Vendor Part Number(s) Vendor Description Lead Time/shipping notes Other Notes 1 ...

    • Boot POS-X Devices from USB

      Objectives Boot an EVO-PC4-F2UN POS-X device from a USB device such as a thumb drive in order to install a new operating system. Prerequisites 1. USB keyboard. 2. POS-X device starting with KQ or R serial number (NOT GZ). 3. Bootable USB device such ...

    • Update BIOS on DT Research DT315BT Tablets

      Objectives Update the BIOS on DT315BT tabets so OS Images 7.1.0+ install correctly. Prerequisites DT315BT Tablet DT Research dock BIOS update USB drive Keyboard Instructions Insert "BIOS Update" USB drive into the USB port on the left-hand side of ...